Flexx Handlebar Crossbars

Gen 1: The Gen 1 was our very first iteration of the Flexx Bar. Manufactured from January 2002 through December 2009. This bar has been discontinued, we carried parts until 2019 but no longer carry parts for the gen 1 bar aside from elastomers. 

Here is an example of Gen 1 Bar grid: 

 

Gen 2: The Gen 2 was made from January 2010 to March 2014. 

Here is an example of a Gen 2 Bar grid, the biggest indicator being "With FB Technology":

 

Gen 3: The Gen 3 bar was made from April 2014 through July of 2022. 

Here is an example of a Gen 3 Bar grid, the biggest indicator being "With FB3 Technology": 

 

Gen 4: The Gen 4 bar is our current bar, we made the switch to the Gen 4 in August 2022. The notable difference from gen 3 to gen 4 is the length of the crossbars. For Gen 4 we went to one standard crossbar length. Our atv, enduro, moto, and adventure bars will use SHORT CROSSBARS ONLY. 

Here is an example of a Gen 4 Bar grid, the biggest indicator being "With FB4 Technology": 

What generation and length crossbar you need:

Gen 2/3:

Long crossbars are 10” long from end to end. Long crossbars are found on our wider Moto bar. 

Short crossbars are 9” long from end to end. Short crossbars are found on our narrower Enduro bar and our Adventure bar. 

Gen 4:

Short crossbars ONLY. For gen 4 we went to one standard crossbar length for everything, quad, enduro, moto, and adv bars. 

Straight crossbars or damper crossbars?

Straight Crossbars are for riders not running a steering damper, or are running a damper mounted under the bar.

Damper Crossbars are for riders running an over the bar steering damper. The raised crossbars allow room for mounting the damper above the bar. 

1. Two crossbars
2. Four crossbar clips
3. Four o-rings