Backorder Notice: Due to the overwhelming demand post Covid-19, we're experiencing delayed shipping times. Call or email for more accurate ETA on specific bar bends or products.

Flexx Handlebar Bends - Moto

Flexx Handlebar Bend Charts

We spend more time on ergonomics than any other brand, we'd love to help you select the correct bend for your preferences, needs and goals. Near the bottom of the page there's a complete cross reference list of OEM offerings. Please email or call us if you don’t see the bend cross reference you are looking for or you need help choosing the correct bend, we're happy to help!

 

Popular Bends from Other Brands (Cross Reference)

Model (A) Sweep (C) Width (D) Height Comparable Flexx Handlebar
CR High 62 795 95 15° Moto
RC 54 802 99 12° Moto
RC High 54 802 119 12° Moto High
Renthal 971 54 802 99 12° Moto
Henry/Reed 57 800 92 14° Moto
Windham/Rm Mid 53 800 99 12° Moto
Woods High 65 800 97 15° Moto
Villopoto/Stewart 55 805 93

12° Moto

Stock Ktm (2015-2021) 54 800 95 12* Moto
Stock Husky (2018-2021) 52 800 80 12* Moto
Stock Kawasaki (2009-2020) (Renthal 971) 54 802 99 12* Moto
Stock Honda (2021+) 54 800 95 12* Moto
Stock Yamaha (2015+) 56 800 90 14* Moto
Stock Beta (2016+) 38 795 95 10* Enduro 

 

A. Sweep
Shown in degrees/millimeters

B. Mid Section
Enduro bends have a 7.25" center section, while Moto bends have 8.25".

C. Overall Width
Measured from handle end to handle end in inches

D. Height
Measured in millimeters

 

Flexx Handlebar Notations and Definitions

            • Our Enduro Bars are 31 inches wide, while our Moto Bars are 32 inches wide. 
            • All Enduro and Moto bends offer 9” of handle room, over an inch more than a traditional bar.
            • Damper Crossbars accommodate over the bar steering dampers. Damper Crossbars can be added to any Flexx Handlebar. 
            • The Low Bar was designed to offset the added height of a submount damper. You must run a sub mount damper or a riser for the bottom of the bar to clear the top of the fork caps.
            • All Flexx Handlebars require a 1 1/8" bar clamps.

 

Flexx Handlebar Bends

10 Degree Bends (A) Sweep (C) Width (D) Height Part Number
10* Enduro Low 10* / 40mm 31in 63mm FL-1000-10-31
10* Enduro  10* / 40mm 31in 92mm FL-1001-10-31
10* Enduro High 10* / 40mm 31in 116mm FL-1003-10-31
10° Moto Low 10° / 40mm 32in 63mm FL-1000-10-32
10° Moto  10° / 40mm 32in 92mm FL-1001-10-32
10° Moto High 10° / 40mm 32in 116mm FL-1003-10-32
12 Degree Bends (A) Sweep (C) Width (D) Height Part Number
12* Enduro Low 12* / 54mm 31in 63mm FL-1000-12-31
12* Enduro  12* / 54mm 31in 92mm FL-1001-12-31
12* Enduro High 12* / 54mm 31in 116mm FL-1003-12-31
12° Moto Low 12° / 54mm 32in 63mm FL-1000-12-32
12° Moto 12° / 54mm 32in 92mm FL-1001-12-32
12° Moto High 12° / 54mm 32in 116mm FL-1003-12-32
14 Degree Bends (A) Sweep (C) Width (D) Height Part Number
14* Enduro Low 14* / 57mm 31in 63mm FL-1000-14-31
14* Enduro  14* / 57mm 31in 92mm FL-1001-14-31
14* Enduro High 14* / 57mm 31in 116mm FL-1003-14-31
14° Moto Low 14° / 57mm 32in 63mm FL-1000-14-32
14° Moto 14° / 57mm 32in 92mm FL-1001-14-32
14° Moto High 14° / 57mm 32in 116mm FL-1003-14-32
15 Degree Bends (A) Sweep (C) Width (D) Height Part Number
15* Enduro 15* / 62mm 31in 92mm FL-1001-15-31
15* Enduro High 15* / 62mm 31in 116mm FL-1003-15-31
15° Moto 15° / 62mm 32in 92mm FL-1001-15-32
15° Moto High 15° / 62mm 32in 116mm FL-1003-15-32

 

KTM/HUSQ stock bend cross reference

KTM Item Number Model Description A Sweep C Width D Height Comparable Flexx Handlebar
548.02.001.000 SX/EXC RENTHAL 686 38 808 105 10* Moto High
548.02.001.100/17 SX/EXC RENTHAL 608 38 805 95 10* Moto
548.02.101.200/17 SX/EXC NEKEN 40 808 105 10* Moto High
548.02.001.300/17 SX/EXC RENTHAL 827 SX 39 808 95 10* Moto
548.02.001.400/17 SX/EXC NEKEN 39 808 95 10* Moto
548.02.001.300/04 SX/EXC NEKEN 37 806 90 10* Moto
590.02.001.000 SX/EXC MAGURA SX 38 808 95 10* Moto
773.02.001.100/17 SX/EXC RENTHAL SX 56 806 85 12* Moto
773.02.001.100/30 SX/EXC RENTHAL SX 56 806 85 12* Moto
777.02.001.00/30 SX/EXC RENTHAL 827 SX 52 811 92 12* Moto
780.02.001.000/17 SX/EXC NEKEN 41 808 89 10* Moto
548.02.001.000 MAGURA MX 54 808 80 12* Moto
584.02.001.100 RENTHAL 617 55 808 80 12* Moto
587.02.001.000 RENTHAL 816 62 795 95 15* Enduro
750.02.001.000 PREMETEC 34 789 104 10* Moto High
548.02.001.100 SX/EXC RENTHAL 608 38 805 95 10* Moto
548.02.001.200 SX/EXC RENTHAL 796 38 805 105 10* Moto High
548.02.001.200/17 SX/EXC RENTHAL 796 38 805 105 10* Moto High
773.02.001.000/17 SX/EXC RENTHAL 812 38 806 89 10* Moto
773.02.001.100 SX/EXC RENTHAL 672 56 806 85 14* Moto
700.02.001.000/30 FREERIDE YEU CHUEN 34 789 104 10* Enduro High
548.02.013.000/04 40 806 90 10* Moto
U6951392 RENTHAL 608 38 808 95 10* Moto
U6951393 RENTHAL 999 55 805 83 12* Moto
U6909866 RENTHAL 604 54 802 99 12* Moto
KTM SX/SXF 09-12 Renthal 672 56 805 85 12* Moto
265.02.001.000.30 19 TE, '17-18 FX Pro Taper made by FZ 53 800 87 12* Moto
780.02.001.000/30
16-19 EXC/XC-W
54 803 85 12* Moto
780.02.001.000/17
KTM 690/Husq 701
41 808 89 10* Moto
790.02.001.000/30 '17+ 125- 450SX,  '17 + 150-300XC,    '17+ 250/350/450XC-F 55 809 77 12* Moto
777.02.001.000/17 Neken 57 805 86 14* Moto

 

 OEM Cross Reference

Manufacturer / Model Comparable Flexx Handlebar Notes 
Beta
4 STK RR/RS Stock
10* Enduro
2 STK RR Stock
10* Enduro
Xtrainer
10* Moto
Honda
CR 85 12° Mini Requires oversize mounts
CRF 150 12° Mini Requires oversize mounts
CRFX 05-17 12° Moto Requires oversize mounts
CRF 250/450 12° Moto Requires oversize mounts
XR 400 14° Moto Requires oversize mounts
XR 650 14° Moto Requires oversize mounts
Kawasaki
KX 65 12° Mini Requires oversize mounts
KX 85/100 12° Mini Requires oversize mounts
KX 125/250 12° Moto Requires oversize mounts
KX 250/450F 12° Moto Requires oversize mounts
Husqvarna
125-501 See KTM/Husq bar chart cross reference above. 
TC 65 10* Mini Low
Suggested trim width 28.5".  Requires oversize mounts, KTM part #'s and ergonomic notes are below. 
TC 50 10* Mini Low
Suggested trim width 28".  Requires oversize mounts, KTM part #'s and ergonomic notes are below. 
KTM
See KTM/Husq bar chart cross reference above. 
03-08 SX/XC/XCW/EXC 10° Enduro  
SX/SXF 09-12 10° Enduro  
XC/XCW/EXC 09-12 14° Enduro  
KTM 85/105 10° Enduro  
KTM 65 10° Mini Low 
Suggested trim width 28.5".  Requires oversize mounts, KTM part #'s and ergonomic notes are below. 
KTM 50 SX 10° Mini Low   Suggested width trimmed to 28".   Requires oversize mounts, KTM part #'s and ergonomic notes are below. 
Suzuki
RM 85 12° Mini Requires oversize mounts
RM 125/250 14° Moto Requires oversize mounts
RMZ 250/450 14° Moto  
DRZ 250/400/650 15° Moto Requires oversize mounts
Yamaha
Yamaha YZF/WR 02-16 15° Moto  
YZF/WR 17+ 12* Moto
YZ 65/85 '18+ 10° Mini Low