Flexx Handlebar Bends - Adventure

Flexx Handlebar ADV Bend Charts

We spend more time on ergonomics than any other brand, we'd love to help you select the correct bend for your preferences, needs and goals. Near the bottom of the page there's a complete cross reference list of OEM offerings. Please email or call us if you don’t see the bend cross reference you are looking for or you need help choosing the correct bend, we're happy to help!


Popular Bends from Other Brands (Cross Reference) 

Model (A) Sweep (C) Width (D) Height Comparable Flexx Handlebar
CR High 62mm 795mm 95mm 15° Moto
RC 54mm 802mm 99mm 12° Moto
RC High 54mm 802mm 119mm  12° Moto High
Pastrana FMX 55mm 800mm 121mm 12° Moto High
Husqvarna 501/701 (Stock Bar) 40mm 812mm 95mm 10° Adventure Low
Africa Twin (Stock Bar) 80mm 812mm 121mm 19° Adventure
Ktm 790/890/990/1090/1190/1290 (Stock Bar) 80mm 812mm 105mm 19° Adventure
BMW 800/1200 (Stock Bar) 85mm 790mm 105mm 19° Enduro High
Ktm 690 (Stock Bar) 40mm 810mm 95mm 10° Adventure Low

A. Sweep
Shown in degrees/millimeters

B. Mid Section
Enduro and Adventure bars have a 7.25" center section.

C. Overall Width
Measured from handle end to handle end in inches

D. Height
High / low measured in millimeters


Flexx Handlebar Notations and Definitions

            • Our Adventure bar is built on the narrow Enduro center section shown as measurement (B) with one inch longer handles for an OA width of 32.5", providing plenty of room to mount all your controls and accessories. Adventure bends offer 10" of handle room.
            • Damper Crossbars will accommodate over the bar steering dampers. Damper Crossbars can be added to any Flexx Handlebar. Submount dampers do not require use of damper crossbars.
            • Flexx Handlebar can be used with enduro computers, trip computers, GPS, steering dampers, roll charts, etc., etc. We offer a dash in our store section that will easily accommodate most GPS. 


Handlebar Bend Options

10 Degree Bends (A) Sweep (C) Width (D) Height Part Number
10° Enduro 10° / 40mm 31in 92mm FL-1001-10-31
10° Enduro High 10° / 40mm 31in 116mm FL-1003-10-31
10° Adventure Low 10° / 40mm 32.5in 92mm


10° Adventure 10° / 40mm 32.5in 116mm


12 Degree Bends (A) Sweep (C) Width (D) Height Part Number
12° Enduro 12° / 54mm 31in 92mm FL-1001-12-31
12° Enduro High 12° / 54mm 31in 116mm FL-1003-12-31
12° Adventure Low 12° / 54mm 32.5in 92mm FL-1001-12-32.5
12° Adventure  12° / 54mm 32.5in 116mm FL-1004-12-32.5
14 Degree Bends (A) Sweep (C) Width (D) Height Part Number
14° Enduro 14° / 57mm 31in 92mm FL-1001-14-31
14° Enduro High 14° / 57mm 31in 116mm Fl-1003-14-31
14° Adventure Low 14° / 57mm 32.5in 92mm FL-1001-14-32.5
14° Adventure  14° / 57mm 32.5in 116mm FL-1004-14-32.5
15 Degree Bends (A) Sweep (C) Width (D) Height Part Number
15° Enduro 15° / 62mm 31in 92mm FL-1001-15-31
15º Enduro High 15° / 62mm 31in 116mm FL-1003-15-31
15° BMW 15° / 62mm 31in 116mm FL-1003-15-31
15° Adventure Low 15° / 62mm 32.5in 92mm FL-1001-15-32.5
15° Adventure 15° / 62mm 32.5in 116mm FL-1004-15-32.5
19 Degree Bends (A) Sweep (C) Width (D) Height  Part Number
19° Enduro 19° / 80mm 31in 92mm FL-1001-19-31
19° BMW 19° / 80mm 31in 116mm FL-1003-19-31
19° Adventure/Super Tenere 19° / 80mm 32.5in 116mm FL-1004-19-32.5


OEM Cross Reference

Manufacturer / Model Comparable Flexx Handlebar Notes
800/1200 19° Enduro High Our 19° Enduro or 19° Enduro High usually work best on the BMW.
Africa Twin 19° Adventure Our 15° and 19° Adventure Bends work best on the AT
KTM 1090/1190/1290 19° Adventure



KTM 690/Husq 701 10° Adventure Low


We recommend our Adventure bars on the 690/701 as it offers more control mounting room.